吉玛泰克-夹具原理-九江夹具

夹具订制

agg可在机械手和模具间提供精i准的中心。

注塑模具内金属嵌件安放时尤其要注意这一点。

夹具agg...b 安装在eoat上，钢管 agg...c 安装在模具上。

一旦机械手向模具靠近，夹具原理，夹具在压力的作用下逐步向钢管靠近，机械夹具，

并与之接触。

agg21-b 和 agg30-b 采用的是双动作安全弹簧，---在压缩空

气 (nc)缺失时设备的正常运行。

agg19-b 采用的是单动作复位弹簧(no)。

gripper for engagement

the agg is used to provide a precise ws=ing between the robot

and the mould.

this necessary when metal inserts must be p1aced in the

mould，夹具生产， before the p1astic injection.

the gripper agg…-b is fitted on the eoat， while the steel bushing

agg…-c is fitted on the mould.

once the robot has approached the mould， the gripper is

pressurized， thus it closes&engages the bushing.

agg21-b&agg30-b are double-acting with a safety spring to

keep the gripper engaged even without compressed air (nc).

agg19-b is single-acting with reset spring (no).

3-jaw self-centring electric gripper

? plug & p1ay user friendly gripper.

? no electricity con5umption when gripper is engaged.

? no programming required.

? gripper retention guaranteed in event of blackout.

? self adapting jaws part.

? long life brushless motor (brushless dc).

? built-in motor driver.

? 24 vdc low voltage power supply.

? m8x1， 3 poles standard connection.

? controllable by plc as a pneumatic valve.

? fiber-carbon gear reduction.

? 10 milion cycle maintenance-free.

? t-slot ss jaws for heavy loads.

? weight-dimensi0n5-force best trade off.

? rotary actuator fitting compatible.

? optional ---ic sensors.

吉玛泰克(图)-夹具原理-九江夹具由吉玛泰克自动化工程（常熟）有限公司提供。吉玛泰克自动化工程（常熟）有限公司拥有---的服务与产品，不断地受到新老用户及业内人士的肯定和---。我们公司是商盟会员，---页面的商盟图标，可以直接与我们人员对话，愿我们今后的合作愉快！
     联系我们时请一定说明是在100招商网上看到的此信息，谢谢！
     本文链接：https://tztz352373.zhaoshang100.com/zhaoshang/286489425.html
     关键词：